Commercial

Echoflex Solutions Inc. is pleased to announce the release of its newest product, the MOS-17 occupancy sensor. A wireless, self-powered occupancy sensor detecting motion in room and office spaces, the MOS-17 is one of the most technologically advanced in the lighting industry. Powered by six solar cells, the MOS-17C can operate without battery backup for over 60 hours. An efficient power supply and tuned sensor circuitry allows the MOS-17 to provide immediate response on occupancy states making it an ideal solution for auto-ON applications.

Design features include;

Powered by a solar cell, the MCT-17 is a magnet contact switch with integrated temperature sensor and temperature set point adjustment. The MCT can be used to transmit window or door status or temperature wirelessly with no batteries. Rolling back temperature setpoints based on the window/door status,activating a lighting load when someone enters a room, or averaging temperature over a large space are just several of the applications for this versatile device.

With the simplicity of 'peel and stick' installation,;providing elementary control to an office, hotel room or condominuim is quick and easy while eliminating any disruption for the occupants.

The Echoflex temperature sensor with optional set point  is available in both 315 and 868 MHz and now available.

Powered by a solar cell, the MT-17 remote temperature sensor can be used to transmit temperature of an interior space wirelessly with no batteries. The MT-17 works in conjunction with Echoflex's electronic base board controller (ER1C-BB) or the Echoflex thermostat (ER-TSTAT  - not yet released) to control heating equipment. Use many of the MT-17's for averaging temperature control of large spaces. With the optional set point adjustment, provide a user interface for adjustable temperature set point settings.

The TAP-17 is a wireless task ambient photosensor designed for indoor use.

The TAP-17 uses energy harvesting solar cells for power and uses a very low power radio allowing it to operate in low light conditions for extended periods of time.

The TAP-17 sensor transmits light levels to receivers or controllers which can then activate lighting fixtures based on need. Harvesting the ambient daylight in work and living areas is a well recognized method of conserving energy.

The PTM265KCA is a key card activated switch ideal for use in Hotel Master Room Control applications. The switch is wireless and self powered - never requiring batteries.

Through its simple learn process the switch is programmed to a full circuit controller (the ERDRC-K, for 868 MHz and the ERDRC KC for 315 MHz) that will provide master control. The controller is able to learn up to 30 key card activated switches and will only de-activate when the last one is removed.

Echoflex's PTM265 is a decorator style  rocker switch/EnOcean transmitter. The switch is wireless and self powered, never needing batteries!

The switch transmits ON/OFF signals to Echoflex controllers enabled with EnOcean receivers.

Echoflex's PTM265D is a dual decorator style  rocker switch/EnOcean transmitter. The switch is wireless and self powered, never needing batteries!

The switch transmits ON/OFF signals to Echoflex controllers enabled with EnOcean receivers.

 The energy module ECO 100 is an energy converter for linear motion. It can be used to power the PTM 230 radio module or deriviates. The energy output at every actuation of the spring is sufficient to transmit 3 sub-telegrams with a PTM 230 module. Possible applications are miniaturized switches and sensors in building technology and industrial automation.

TCM 300 and 

STM300 - Ideal for bidirectional energy harvesting wireless sensors (868 only to April 2010) [product]