Use the power of your finger to control loads

Echoflex switches are wireless and self powered  - no batteries ever!

Each switch  has their own 32 bit unique id that is set right at the factory.  Each controller can learn 20 switches off the shelf. This provides a very flexible control. This means adding manual switch control to any load is very quick, expandable, and flexible. The switches can be positioned to the occupant's preference.

Personal Switch Control

Adding a switch is very easy. Each Echoflex controller will learn a switch right off the shelf quickly and easily. Install the controller per the installation instructions, power up the circuit, grab a switch, push it 3x on, 3x off, 3x on and you are done - you have switch control.

Timed Switching

Echoflex controllers default to performing just on and off however, if they only know a switch then they can also be a timed switch. Time outs can be set to 5, 15, 30, 60 minutes (see installation guides) - so hit the switch on and XX minutes later it goes off. Two unique features are that the time will increment with the number of pushes on you do. Firstly, if the timer is set to 30 minutes, one push = 30 minutes, two pushes = 60 minutes and so on, the device will increment the time through 5 pushes and secondly one minute before the light is to shut off the device will perform a flick warn, giving the occupant a chance to push the switch to re-start the timer.

Three Way Switching

Add a second, third or fourth switch (up to 20 to an individual controller) and create 3,4 or more way switching in literally seconds. Use the learn buttons or smartclick to add further switches - simple installation to the wall, furniture, glass, concrete. 

Three Way Dimming

Select the Echoflex ERDRC DCC controller with 0-10V dimming at 120, 277 or 347V and a push and hold on will dim up and a push and hold off will dim down. A quick push and release turns the load on or off. Add a second, third or fourth switch (up to 20) and create multi way dimming in seconds with peel and stick switches.

Create Master Switching Control 

Have a series of offices, each with their own controller? Learn a switch to each of the controllers and enable a master all off switch. The decorator style switch can be modified quickly so that the master switch only turns loads off and never turns them all on.

Create Pathway Lighting 

Learn a switch to specific controllers and create a pathway - very fast and very easy.