Elaho 0-10V Controller

Relay and dimming - all in one

Whether you're lighting classrooms, restaurants, hotel conference rooms, or another type of space, the Elaho 0-10V Dimming Controller provides you with on/off functionality for LED drivers and fluorescent ballasts up to 20 amps. Elaho 0-10V Controllers are available for single- or dual-zone configurations, allowing for added flexibility in your installation.

Plug-and-play.  The installation of your system is easy with the Elaho 0-10V Controller. It's ready to go right out of the box - no software or programming required. The added benefit of using Cat-5 cable means that adding more stations or sensors is a breeze, while the Elaho 0-10V Controller's flexible infrastructure and topology-free control wiring makes overall setup remarkably stress-free.

The Elaho 0-10V Controller can connect to 16 control stations and sensors, and 15 additional power controllers or panels, giving you a top-of-the-line energy- and labor-saving system with a low overall cost and an immediate return on your investment. And with up to 500 meters (or 1640 feet) of control-wire per system, it can reach any location you need.

It's easy being green.   Elaho was specifically developed with your energy concerns in mind. Keeping green has never been easier - Elaho's complete line of products gives you maximum energy savings while adhering to the growing number of industry energy codes, such as ASHRAE 90.1, CA Title 20/24, and IECC, all without breaking the bank.

Elaho 0-10V Controllers provide line voltage isolation for each control output. This isolation protects equipment from mains voltage leaks so that equipment can be prepared for any 0-10V driver in the field.

Product Elaho 0-10V Dimming Controller
Datasheet Rev A
Others Installation Guide