Elaho-Echoflex Interface

Elaho Anywhere

The Elaho-Echoflex Interface allows for wireless communication between Elaho and Echoflex control systems. When it's not practical to run wires between every device in your building's control system, the Elaho-Echoflex Interface is the solution. Using the built-in 902 MHz radio the Elaho-Echoflex Interface can transmit wireless signals to any Echoflex control device within 80 feet. And since the Elaho-Echoflex Interface is a DIN-rail-mount device, you can install it nearly anywhere.

Flexible output or input system control

With four inputs and outputs, it's easy to expand your system with the Elaho-Echoflex Interface. Control your Elaho presets and zone levels by linking Echoflex devices -- including Keycard and Wave Stations, and Occupancy/Vacancy Sensors -- to Elaho-Echoflex Interface input. Or you can control Echoflex power controllers such as Relay and Split Duplex Controllers or Phase-Adaptive Dimmers from your Elaho system.

 

*Available in North America only.

Datasheets & Specs

Elaho-Echoflex Interface Datasheet

Manuals & Release Notes

Elaho-Echoflex Interface v3.3.6 Release Note

Elaho-Echoflex Interface Installation and Programming Guide

 

Wiring diagrams

DescriptionFile TypeFile Type
Elaho-Echoflex Interface Wiring Diagramdwgpdf
Elaho Power Supply (E-SPS-DIN) with Two Elaho-Echoflex Interface (EEI) Wiring Diagramdwgpdf
Elaho Power Supply (E-SPS-DIN) with Two Elaho-Echoflex Interface (EEI) Wiring Diagramdwgpdf
Elaho Power Supply (E-SPS-DIN) with Four Elaho-Echoflex Interface (EEI) Wiring Diagramdwgpdf
Elaho Power Supply (E-SPS-DIN) with Four Elaho-Echoflex Interface (EEI) and Elaho Timeclock (E-ATC) Wiring Diagramdwgpdf
Elaho Power Supply (E-APS2) with Echo-Echoflex Interface (EEI) and Elaho Touch (ETS) Wiring Diagramdwgpdf