ER1C DH Electronic Heating Controller

The ER1C-DHC Heating Controller can be used to control electrical heating appliances including base-boards and radiant heat flooring systems.

Using one or more remote wireless temperature sensor to provide space temperature, the controller will activate the internal relay whenever the temperature falls below the setpoint. A temperature dead-band or hysteresis prevents the controller from cycling the heating appliance too often. The temperature set point value can also be acquired via a wireless sensor with an adjustable setpoint feature.

Further control can be added with the addition of wireless occupancy sensors and/or wireless window / door position switches. The temperature controller will automatically setback the active temperature setpoint when the space is unoccupied or a window or door has been left open. The auto- setback mode can dramatically increase energy savings by not over-heating spaces when no one is present.

Product Image: