How do I create a 3-way dimming switch?

When the Echoflex PTM265 switches are used with the ERDRC-C controller, the switches activate the controller's internal relay but also double as dimmer switches. With the relay closed (ON) and pressing & holding the ON or OFF side of the switch, the ERDRC-C's dimming ballast output will modulate ramping the lighting fixtures light output. Setting up multiple switches as dimming switches is simple as linking switches to the controller.

Each controller/receiver can learn up to 30 unique switches or sensors. The receiver is wired ahead of the load and then switches can be linked.

Review this FAQ for the process of linking switches to a controller. Programming takes seconds and the only tool required is a pen.