News

Echoflex releases WDS9 Wireless Open-Loop Photo Sensor

The new WDS9 from Echoflex Solutions is a wireless, solar-powered, open-loop photo sensor.  The WDS9 is designed for indoor use and does not require batteries or wires to operate, allowing it to be mounted inconspicuously on the window mullion. The WDS9 monitors exterior light levels (up to 65000 lux / 6000 footcandles) and sends out wireless transmissions whenever the reading has changed...

Read


ELED1 LED Fixture Controller

Squamish, British Columbia (January 16, 2018) – The new ELED1 wireless lighting controller from Echoflex Solutions is designed to operate with today’s LED luminaires. Incorporating a universal power supply, 0 to 10 volt low voltage dimming capability and a rugged load relay, the ELED1 is ideal for individual fixture or single zone lighting control. The two form factors, surface mount with...

Read


IoT Ceiling Sensor

Responding to the demands of the IoT sector, Echoflex has leveraged its world-class, energy harvesting, wireless and battery-free designs to address diverse facility environment sensing.The MOS-MT combines detection of occupancy/vacancy, temperature, light level and audible noise values into a single, wireless sensor. The MOS-MT provides real-time data of relevant environmental parameters that...

Read


Echoflex introduces MOS Series Dual Tech Ceiling Mount Sensor

In the continuing evolution of our occupancy-sensor platform, Echoflex Solutions, Inc. is launching the MOS-DT solar-powered, wireless, dual-technology sensor.Improvements in solar energy-harvesting and power management have made it possible for us to create this benchmark in battery-free, wireless, dual-tech ceiling sensors. The MOS-DT uses PIR and acoustic sensing technologies to provide 360...

Read


Echoflex Solutions launches Dual Tech Wall Switch Sensor

 Echoflex Solutions Inc. introduces an industry first with the new OWS series of Wall Switch Sensors.Available in PIR and Dual Tech PIR/Acoustic sensing models, the new OWS Wall Switch Sensors are line-powered, wall-mount, occupancy/vacancy sensors with an integrated rocker switch that communicates wirelessly to Echoflex controllers. The OWS is a no-neutral conductor-powered device...

Read


Echoflex’s project-specific QR codes

Echoflex’s project-specific QR-code system gives contractors the information they need anytime, anywhere. Each shipment receives a QR-code sheet, that when scanned, links your smartphone or tablet to the Echoflex project folder, providing all system details required for a successful installation.The QR Code provides:Final drawing (PDF) – Layout drawing with markup stamps that show the locations...

Read


Echoflex Daylight Harvesting Solution

Echoflex Solutions, Inc. is pleased to introduce a daylight-harvesting solution that utilizes our self-powered, wireless controls. Echoflex’s photo sensor transmits light-level readings to receivers or dimming controllers, which can then modulate the artificial light contribution based on need. Harvesting the ambient daylight in work and living areas is a well-recognized method of conserving...

Read


Pre-commissioning service is taking off

Echoflex Solutions Inc introduced factory pre-linking and pre-configuration of self-powered, wireless lighting- and temperature-control products more than six months ago. The process has greatly reduced the time required for onsite commissioning and system verification, which has resulted in faster deployment and reduced startup time.The Echoflex linking process means that sensors, switches and I...

Read